Compact Switching Power Supply - Selectable Output 3-12VDC
Adafruit
$29.15
is on back order
This model is 10 Watts and has 6 selectable outputs ranging from 3V to 12VDC and up to 1.5A output. It has a 2-prong plug, but takes 110VAC to 240VAC so you can use it anywhere with a simple plug adapter.
It comes with a range of tips, such as 2.5mm mono, 3.5mm mono, 5.5mm/2.5mm, 2.5mm/2.1mm, 4mm, etc. You can also change it from center positive (most common) to center negative (less common but seen in some audio gear).
- Multi changeable plug DC-cord.
- Universal AC input 100V to 240V, 50Hz/60Hz
- Universal AC input plug available (BSI, USA, Europe, Aust)
- 6 selectable outputs: 3V-12V MAX. 1500mA.
- Over load, over current, over heat protection.
- International approval CE EN60950, UL1950, CSA22.2 No.950.
- EMC approval EN55022.
- Extra low consumption during standby (about 8% of linear adapter).
- Weight: 86g approximately.
- Small size: 67x29x74mm.
- Cable length: 1.54m / 60 3/4"
Below is the voltage current table and avoid higher loads! | ||||||
Rate output Voltage | 3V | 4.5V | 6V | 7V | 9V | 12V |
Max. output current at 220V | 1.5A | 1.2A | 1.0A | 0.9A | 0.8A | 0.7A |
Max. output current at 110V | 1.5A | 1.2A | 1.0A | 0.9A | 0.8A | 0.6A |